GQ45 mobile small steel bar cutting machine with clutch control
rebar cutter shearing machine
Rebar cutter is efficient machine used for bend low-carbon steel
including round steel, steel flats, steel angles, and deformed
steel bars into various shapes at construction sites and
construction steel processing factories.
Product Advantages;
1. Small size, good quality, compact structure, firm and reliable.
2. Good lubrication performance: Adopt box-type closed structure,
gear splash lubrication, in turn, continuous operation can be used
for more than a month.
3. The oil level should not be lower than the oil mark scale line,
so that the machine is always in good lubrication.
4. The less function wear: Due to improved lubrication conditions,
the gear shaft end uses rolling bearings, compared with the same
type of cutting machine ,power can be reduced by one third.
5. Easy to move: Front wheel steering, flexible, easy to maintain.
6. The spare parts of the machine weighted casing, thickened side
cover, grease-regulating crankshaft, grease-regulating crankshaft
wheel, forge tool holder, weighted connecting rod, copper
crankshaft, GB 3KW motor, full-shield , clutch sleeve, weighted
casters, thickened upper cover with tool box, 20A Delixi electric
with thermal relay, V-belt, bearing, thickened blade, thickened
knife clip, cutter, plated dual-use clutch Pole.
Technical Parameters.
| Item | Rebar Cutting Machine | Bending Ability | Cutting Speed | Motor Power | Weight | Dimension |
| 1 | GQ40 | Round steel bar≤40mm; Class-III rebar:≤28mm | 32t/min | 3kw | 320kg | 135x44x74cm |
| 2 | GQ40B | Round steel bar≤40mm; Class-III rebar:≤32mm | 32t/min | 3kw | 330kg | 136x45x74cm |
| 3 | GQ45 | Round steel bar≤45mm; Class-III rebar:≤32mm | 28t/min | 3kw | 330kg | 133x44x74cm |
| 4 | GQ45C(circle-blade cutter) | Round steel bar≤45mm; Class-III rebar:≤32mm | 28t/min | 3kw | 350kg | 133x44x74cm |
| 5 | GQ45B | Round steel bar≤45mm; Class-III rebar:≤36mm | 28t/min | 3kw | 390kg | 140x44x75cm |
| 6 | GQ45A(circle-blade cutter) | Round steel bar≤45mm; Class-III rebar:≤40mm | 28t/min | 3kw | 395kg | 140x44x75cm |
| 7 | GQ50B | Round steel bar≤50mm; Class-III rebar:≤42mm | 28t/min | 4kw | 500kg | 143x47x77cm |
| 8 | GQ50A(circle-blade cutter) | Round steel bar≤45mm; Class-III rebar:≤42mm | 28t/min | 4kw | 510kg | 143x47x77cm |
FAQ
1. Can the motor voltage and machine color be changed?
Yes, we can change the motor according to the voltage requirement
in your country. Machine colors can also be changed according to
your preference.
2. What are the consumable spare parts?
Commonly used spare parts are blade, copper tiles, connecting rod.
We have them in stock, you can buy it easily.
3. What is the warranty of your machine?
Machine warranty is 6 months. During the guarantee period, if any
quality problems occur, we will provide the related spare
parts(consumable spare parts not included) free of charge.
4.Can you arrange technician to train us in our country?
Yes, we can arrange technical person to have training for you, and
the air ticket charge, board and lodging expenses shall be paid by
your side.
5.What are the terms of payments you offer?
Payment of the goods should be sent in USD or RMB on the basis of
goods Values. We accept payment of T/T, L/C,
etc.
