Concrete vibrating table three phase horizontal vibrator motor
external electric vibrator
Pls Advice the Following Information
1. Your usage?
2.. The power? (KW)
3. The rotation speed? (rpm)
4. The quantity? (units)
Vibrating Motors Description
1. The motor vibrator is special asynchronous vibrating source
uniting motive power source and vibrating source into once,it and
can be used to equip vibrating screen,vibrating feeder ,vibrating
conveyor,vibrating ore drawing machine,vibrating shakeout machine
,vibrating platform(plain bumper),bulkhead vibration.ical, port and
other industries.
2. Three phase vibration motor is designed as a high-end vibrating
motor.It is available in several types with different
specifications, while the most powerful one comes with an exciting
force of 300 KN, and is driven by 30kw power.The rotor and stator
are made of excellent silicon steel sheet.The heat dissipation is
limited.High purity copper wire is used for better performance of
the motor.The design of electromagnetic spec is suitable for
vertical motor's operating characteristics. Be swift starting and
stable operating.
Vibrating Motors Application
1. Sieving equipment :linear vibrating sieve ,sieve mining ,coal
washing sieve ,sieve abrasives,chemic sieve.
2. Conveying equipment:vibration conveyor ,conveyor drying
vibration ,vibration vertical lifting machine.
3. Feeding equipment :vibratory feeder, vibrating hopper machine
,vibration mining machine ,vibration filling machine .
4. Other equipment:vibration fluidized bed, vibration platform.
Vibrating Motors Parameters
| No. | Model | Force(KN) | Power(KW) | Weight(KG) | Installation Size |
| A | B |
| 1 | MV40/3 | 0.3 | 0.05 | 4 | 62-74 | 106 |
| 2 | MV60/3 | 0.7 | 0.07 | 4.2 | 62-74 | 106 |
| 3 | MV100/3 | 1 | 0.09 | 4.6 | 62-74 | 106 |
| 4 | MV200/3 | 2 | 0.15 | 6.8 | 62-74 | 106 |
| 5 | MV300/3 | 3 | 0.25 | 9.8 | 90 | 125 |
| 6 | MV400/3 | 4 | 0.27 | 10.3 | 90 | 125 |
| 7 | MV500/3 | 5 | 0.5 | 15.8 | 105 | 140 |
| 8 | MV700/3 | 7 | 0.59 | 16.5 | 105 | 140 |
| 9 | MV800/3 | 8 | 0.7 | 20.6 | 120 | 170 |
| 10 | MV1200/3 | 10 | 0.95 | 21.6 | 120 | 170 |
| 11 | MV1300/3 | 13 | 1.3 | 24.5 | 120 | 170 |
| 12 | MV1600/3 | 16 | 1.54 | 51.6 | 140 | 190 |
| 13 | MV1800/3 | 18 | 1.85 | 52 | 140 | 190 |
| 14 | MV2000/3 | 20 | 2.1 | 51.8 | 140 | 190 |
| 15 | MV2200/3 | 22 | 2.4 | 52.8 | 140 | 190 |
| 16 | MV2300/3 | 23 | 2.4 | 53.6 | 140 | 190 |
| 17 | MV3200/3 | 32 | 2.76 | 96.9 | 155 | 255 |
| 18 | MV4000/3 | 40 | 2.9 | 107 | 155 | 255 |
| 19 | MV5000/3 | 50 | 4 | 112 | 155 | 255 |
| 52 | MV60/3M | 0.7 | 0.08 | 4.5 | 62-74 | 106 |
| 53 | MV100/3M | 1 | 0.1 | 5.1 | 62-74 | 106 |
| 54 | MV200/3M | 2 | 0.13 | 6.8 | 62-74 | 106 |
| 55 | MV50DC-24 | 0.5 | 0.1 | 4.5 | 62-74 | 106 |
| 56 | MV200DC-24 | 2 | 0.16 | 6.5 | 62-74 | 106 |
FAQ
Q1: Solution to High Temperature of Suspension Bearing of Spiral
Feeder?
A: Improper azimuth installation, the treatment is to adjust the
azimuth of suspension bearings.
B : Abnormal friction occurs when solid bulk materials are mixed
into the machine. The treatment method is to tidy up foreign bodies
and test run them to normal operation.
Q2: Solution of Vibrating Screen Fault?
1. The screening effect is not good. The following aspects should
be checked and maintained.
(1) Blockage of screen hole or damage of screen surface.
(2) The moisture content of raw coal is too high.
(3) Screening feed is uneven.
(4) The material on the screen is too thick.
(5) The screen is not tight.
(6) Stop screening, clean screen or replace screen surface.
(7) The inclination angle of the shaker can be adjusted.
(8) Adjusting the feeding quantity.
(9) Reduce the amount of feed.
(10) Tighten the screen
2. Screen speed is not enough to drive belt loose should be checked
and maintained from the following aspects.
(1) Bearing oil shortage.
(2) The bearing has dirt.
(3) too much oil is injected into bearings or the quality of oil
does not meet the requirements.
(4) Bearing wear.
(5) Oil injection.
(6) Clean the bearing, replace the sealing ring and check the
sealing device.
(7) Check the condition of oil injection.
(8) Replacement of bearings.
